en English

Oil press

We guarantee the highest quality workmanship in the oil&fats industry, established in 40 years of experience

oil press

A screw press consists of a continuous, helical thread that revolves within a stationary, perforated cylinder. As the shaft turns, there is a reduction in volume that results in pressure in the pressing section. The extracted oil flows through the slots distributed over the barrel circumference. The foots-laden extracted oil collected in the oil pan is delivered to the crude oil cleaning section. Oil cake leaves the screw press through an adjustable conical annular cross-section and is then delivered to the further process stages.

Brief Introduction

CHEMSTA screw oil press consists of a continuous, helical thread that revolves within a stationary, perforated cylinder. As the shaft turns, there is a reduction in volume that results in pressure in the pressing section. The extracted oil flows through the slots distributed over the barrel circumference. The foots-laden extracted oil collected in the oil pan is delivered to the crude oil cleaning section. Oil cake leaves the screw press through an adjustable conical annular cross-section and is then delivered to the further process stages.

Types of Presses
Cold Presses
Cold oil press are designed for single-finish pressing without seed preheating, or for pressing at low temperatures. The cold press processes cleaned seed that has been crushed according to its type, as well as uncrushed feedstock.

Finish Presses
Finish presses are designed for single-finish pressing without following extraction. The finish press processes cleaned, crushed and hydro-thermally prepared seed.

Pre-Presses
Pre-presses are designed for pre-pressing in preparation for extraction, or as the pre-stage for secondary pressing operation. The pre-press processes clean, crushed and hydro-thermally prepared seed.

small_c_popup.png

Let's have a chat

Learn how we helped More than 400 oil&protein plants gain success.